Dovetail Router Bits

Akeda 3809 is a 9 Degree Dovetail Cutter Router Bit. This Akeda 9ordm; x 5/8-Inch deep dovetail bit with 8mm shank is used with the 9ordm; pin guides to form through dovetails from 5/8-Inch down to 1/4-Inch thick. It is also used to form fixed depth (5/8-Inch) half blind dovetails using the guide fingers included with the jig. This bit has an 8mm shank so you may need a 1/2-Inch to 8mm collet reducer for your router.

Akeda 3811 is 11 Degree Dovetail Cutter Router Bit. This Akeda 11ordm; x 1/2-Inch deep dovetail bit with 8mm shank is used with the 11ordm; pin guides to form through dovetails from 1/2-Inch down to 1/4-Inch thick. It is also used to form fixed depth (1/2-Inch) half blind dovetails using the guide fingers included with the jig. This bit has an 8mm shank so you may need a 1/2-Inch to 8mm collet reducer for your router.

1/4 shank. Two flute. Cut diameter 3/8 flute length 3/8 9 degree angle Overall length 2 Application Incra

1/2 shank. Two flute. Cut diameter 3/8 flute length 3/8 9 degree angle Overall length 2

The Porter-Cable 43380PC is a Dovetail Router Bit which will help you achieve smooth dovetail joints.Features:Cut Capacity Width: 3/8quot;Degree: 9Flute Length: 3/8quot;Shank Diameter: 1/4quot;Overall Length: 2quot;Whats in the Box:Porter Cable 43380PC 9 Degree Dovetail Router Bit

The Porter-Cable 43448PC is a 2-Flute Dovetail Router Bit which will help you achieve smooth dovetail joints.Features:Cut Capacity Width: 1/2quot;Bevel: 14 DegreeFlute Length: 33/64quot;Shank Diameter: 1/4quot;Overall Length: 2-17/32quot;Whats in the box:Porter Cable 43448PC 2 Flute Dovetail Bit

Porter Cable 43776PC 17/32 7 Degree Dovetail Router BitFeatures:For use with the 4200 Series of PORTER CABLE dovetail jigsEnables through and half-blind dovetails to be cutShank: 1/2-inchBevel: 7-DegreeWidth of Cut: 17/32-inchWhats in the Box:Porter Cable 43776PC Dovetail Bit

Porter Cable 43777PC Dovetail Router Bit For miniture sized dovetail joints. Use with the templates included in the Porter-Cable 4215 Mini Through Templet Accessory Kit.Features:Diameter: 9/32-inchShank: 1/4-inchFlute Length: 17/32-inchCarbide Tipped7-Degree BevelWhats in the Box:Porter Cable 43777PC Dovetail Bit

The Porter Cable 430D0PC is a D0 Dovetail Bit for the Omnijig Joinery Systems. The Porter Cable 430D0PC is 1 of 7 dovetail bits to be used with the Omnijig Joinery System. It is used to cut miniature through dovetails (on up to 3/8 thick wood) and miniature variable-spaced half-blind dovetails (on up to 1/4 thick wood). The angle is set to 7deg; to enable the user to replicate traditional hand cut dovetail joints.

The Porter Cable 430D1PC is a D1 Dovetail Bit for the Omnijig Joinery Systems. The Porter Cable 430D1PC is 1 of 7 dovetail bits to be used with the Omnijig Joinery System. It is used to cut standard and miniature through and miniature variable-spaced half-blind dovetails on up to 1/2 thick wood. The angle is set to 7???? to enable the user to replicate traditional hand cut dovetail joints.

The Porter Cable 430D2PC is a D2 Dovetail Bit for the Omnijig Joinery System. The Porter Cable 430D2PC is 1 of 7 dovetail bits to be used with the Omnijig Joinery System. It is used to cut standard and miniature through and miniature variable-spaced half-blind dovetails on up to 5/8 thick wood. The angle is set to 7???? to enable the user to replicate traditional hand cut dovetail joints.

The Porter Cable 430D4PC is a D4 Dovetail Bit for the Omnijig Joinery System. The Porter Cable 430D4PC is 1 of 7 dovetail bits to be used with the Omnijig Joinery System. It is used to cut standard through dovetails (on up to 3/4 thick wood) and variable-spaced half-blind and single-pass half-blind dovetails (on up to 5/8 thick wood). The angle is set to 7???? to enable user to replicate traditional hand cut dovetail joints.

The Porter Cable 430D5PC is a D5 Dovetail Bit for the Omnijig Joinery System. The Porter Cable 430D5PC is 1 of 7 dovetail bits to be used with the Omnijig Joinery System. It is used to cut standard through dovetails on up to 1 thick wood. The angle is set to 7???? to enable user to replicate traditional hand cut dovetail joints.

Porter Cable 43444PC is a 1/2 inch dovetail profile 10deg; angled flute and Carbide-tipped for long lasting sharpness and durability.Features:Cut Capacity Width: 1/2quot;Degree: 10Flute Length: 5/8quot;Shank Diameter: 1/4quot;Overall Length: 2-3/16quot;Whats in the Box:Porter Cable 43444PC 10 degree 1/2 inch Dovetail Bit

Porter Cable 43454PC is a 1/2 inch dovetail Bit with a 10deg; angled flute. Carbide-tipped for long lasting sharpness and durabilityFeatures:Cut Capacity Width: 1/2quot;Bevel: 10deg;Flute Length: 5/8quot;Shank Diameter 1/2quot;Overall Length: 2-3/8quot;Whats in the Box:Porter Cable 43454PC 1/2 inch Dovetail Bit

The Porter-Cable 43705PC is a 1/2 inch 14deg; Dovetail Router Bit. The bit is annealed and heat treated to rockwell hardness of 40-45-harder than is possible with cast steel bodies. It is precisely ground using computer controlled machining for precision tolerances and perfectly concentric shafts. The dovetail shape of this bit allows the machining of very professional looking and durable joints.Features:Overall Length: 2-17/32quot;Degree of Cut: 14deg;Cut Width: 1/2quot;Flute Length: 33/64quot;Shank Diameter: 1/4quot;Whats in the Box:Porter Cable 43705PC 1/2 Inch 14 Degree Dovetailing Router Bit

The Porter-Cable 43750PC is a 1/2 inch 14deg; Dovetail. The Router bit is designed for routing smooth dovetail joints.Features:Cut Capacity: 1/2quot;WDegree: 14Flute Length: 33/64Shank Diameter: 1/2Overall Length 2-17/32Whats in the Box:Porter Cable 43750PC 14 Degree Dovetail Router Bit